Cells systems

The new Docking GSM station connects a CP540/CP545 stopwatch or our Time Master 550 to the TAG Heuer Timing Online server via a 2G, 3G or 4G link. The advantage of the solution is to synchronize several timing points (start, intermediate and finish) with 2G / 3G / 4G coverage via the server and thus ensure optimal timing in real time. DOWNLOAD GPRS SETTINGS Link PC - Docking GSM => CO3M ou CO2M Link CP545 (or CP540) - Docking GSM => HL540-10 Update of the Docking with => ITS Updater Docking firmware for operation with TAG Heuer Timing Online server => DOCKING FIRMWARE Would you like to use a different server? Get a different firmware: CONTACT US

This box connect easily photocells or any other device with the same connectivity to the decoder.

Essential device to secure and isolate your lines in timekeeping. Meets FIS standards. We recommend the use of optocoupled impulse distributors for the following reasons : • Controls false triggering due to electronic interference on your timing connection wires • Completely isolates your timing electronics to ensure that systems operating in parallel (back up) are not linked in any way to each other

Banana cable (1m) for links, photocell - chronoprinter, receiver - chronoprinter, ...

With ITS Relay box, automate the control of a pit exit light, a barrier, a siren on the checkerboard or any other accessory device from your timing software. The software in association with the solution allows to make the link between the timing software and the element to be controlled according to the status of the race. DOWNLOAD ITS RELAY SOFTWARE

Essential component of the ITS Manual Timing solution. Associated with our ITS Manual Timing software, the ITS Control Box 32 keys allows you to give a time to a competitor number in one click. By adding a HL18-USB manual switch to the system, you will be able to read a time while keeping your eyes on the race and assign this time to a competitor in one click on the specific ITS Control Box 32 keys. This is an essential option for potential mass finishes.

USB adapter that allows to connect a manual contactor to a USB port.

Part of the ITS Manual Timing solution.Associated with our ITS Manual Timing software and the ITS Control Box 32 keys, the HL18-USB manual contactor will allow you to record a time while keeping your eyes on the race and assign this time to a competitor in one click on the specific ITS Control Box 32 keys. This is an essential option for potential mass arrivals.

Recommended fixtures for photocells when the conventional tripod cannot be used (winter sports). Adjustment by one (HL 4) or two (HL 4-2) aluminum ball joints.