Atlas Flash GPS Beacon with integrated onboard display and remote antenna Recommended for vehicles equipped with a heated windshield or where the unit cannot be installed in the recommended position, the Atlas Flash is a next-generation GPS tracking and in-car signaling system designed to enhance safety and race management on racing circuits.It provides real-time display of track safety information, including flags, neutralizations, safety procedures, and specific alerts. Information is transmitted instantly to the vehicle, ensuring clear visibility regardless of track position or weather conditions. The kit includes the power cable and roof-mounted antenna. Mounting bracket not included (optional) :ITSATLASMF-S-3     -     ITSATLASMF-SA

Kit includes 1 wireless photocell 500 mW (HL3-500), 1 infra-red transmitter ITS Chrono (ITSPH-EM), 1 antenna, 1 charger and 1 suitcase. Radio receiver 500 mW for receiving cell impulses sold separately. RECEIVER HL675-RX   

This ITS Chrono timing loop is compatible with all active COBRA, TAG Heuer By Chronelec, Chronelec (LS, Elite) and AMB/Mylaps transponders.It comes with a 470 Ohm resistor and 10 m (32.8 ft) of coaxial double shielded cable.

The Cobra 200 transponder is recommended for fast vehicles (autocross, motocross, slalom...). Official timing system for all French FFSA Championships on Circuit, Gravel, and Ice. It will work perfectly for UFOLEP events, subject to organizer approval. THIS TRANSPONDER IS FIXED WITHOUT SUPPORT.

The new on-board LED position display developed in-house by ITS Chrono ensures the real-time display of the competitor's position in its category.

Individual charger compatible with Cobra Battery 200 (ITSCOBRAT200B) and 360 (ITSCOBRAT360B) transponders.Its latest technology ensures rapid charging in 6 hours maximum. USB power supply, AC adapter not included

Large format for ever intense emotions ! Complete pack for a display of 2304 mm by 1152 mm including : 8 modules ITS Video Led Display P6 ; ITS Display Manager software ; ITS Video Led Display Controller ; 1 waterproof power cable (6 m / 19,7 ft) ; 7 waterproof power cables (85 cm / 33,5 in) ; 7 waterproof data link cables (85 cm / 33,5 in) ; 1 waterproof connector for RJ45 cable ; 14 rear fixing plates with screws ; 4 clamps. RJ45 direct link cable (100 m / 328 ft maximum) not supplied. For more information, consult us.

Spider anchors are strategically placed around the perimeter of the tracking area.They are fixed on specific tripods, very easy to carry and install for an autonomy of 4 hours.100% Made in FRANCE

This video controller can control one or more ITS Video Led Display with different screen resolutions to best meet the needs of the user. Including 1 power cable, 1 USB-Type B cable, 1 cable and 1 DVI-HDMI adapter